Skip to content.

Stellenangebote

Sections
You are here: Home » Products » Fork Positioners » shaft and roller guides separate sideshift, with welded forks
Document Actions
Fork Positioner integral design : Technical drawing
Less Maintenance: Because the bushes are protected against dust and dirt there is little need to grease the shaft-type guidance system. Optimum visibility: MEYER attachments are designed to work in heavy duty operations with optimum visibility for easier handling and greater safety. Integrated Mounting: The attachment is built directly into the mast of the truck thus omitting the carriage. Integrated mounting are possible for all truck types.

The MEYER fork positioner can hydraulically adjust the spacing of the forks within the width of the truck. The shaft-guided forks with capped bushings are suupported at the heel with rollers and provide quick and even adjustment. The separate sideshift positions the load accurately. The unit is not suitable for clamping or squeezing.
  • Additional hydraulics required
    > two for fork positioning and sideshift function
  • max. working pressure 200 bar
  • Units of integral design:
    - Mast drawings must be provided
    - Supplied without mast rollers
    - Lost load centre, centre of gravity and weight from front edge of
    cheek plates
  • Hydraulic flow:
    6-9703H - 20 Ltr./min.
    6-9704H - 20 Ltr./min.
    6-9705H - 20 Ltr./min.
    6-9706H - 35 Ltr./min.
    6-9707H - 35 Ltr./min.
  • Other capacities, fork lengths and
    opening ranges
  • Units also with ISO carrier plates for
    standard truck forks
  • Also available with standard
    ISO mounting
  • Bolt-on forks
[ Fork Positioner integral design ]
shaft and roller guides separate sideshift, with welded forks
Technical drawing


r
- 		type
- 		Q
kg 		LSP
mm 		ISO
Kl. 		S
mm 		A
mm 		F
mm 		F
mm 		K
mm 		H
mm 		L
mm 		C
mm 		E
mm 		M
kg
a 6-9703H 1600 500 integrated 100 1000 330 940 100 40 1200 100 173 240
b 6-9703H 1600 500 integrated 100 1100 330 1040 100 40 1200 100 169 244
c 6-9703H 1600 500 integrated 100 1200 330 1140 100 40 1200 100 165 248
a 6-9704H 2000 500 integrated 100 1000 330 940 100 40 1200 100 168 255
b 6-9704H 2000 500 integrated 100 1100 330 1040 100 40 1200 100 164 261
c 6-9704H 2000 500 integrated 100 1200 330 1140 100 40 1200 100 160 267
a 6-9705H 2500 500 integrated 100 1000 330 940 100 40 1200 100 163 265
b 6-9705H 2500 500 integrated 100 1100 330 1040 100 40 1200 100 159 271
c 6-9705H 2500 500 integrated 100 1200 330 1140 100 40 1200 100 155 277
a 6-9706H 3000 500 integrated 100 1000 340 930 125 40 1200 125 212 315
b 6-9706H 3000 500 integrated 100 1100 340 1030 125 40 1200 125 208 321
c 6-9706H 3000 500 integrated 100 1200 340 1130 125 40 1200 125 204 327
d 6-9706H 3000 500 integrated 100 1300 340 1230 125 40 1200 125 200 333
a 6-9707H 3500 500 integrated 100 1000 340 930 125 45 1200 125 207 340
b 6-9707H 3500 500 integrated 100 1100 340 1030 125 45 1200 125 203 348
c 6-9707H 3500 500 integrated 100 1200 340 1130 125 45 1200 125 199 356
d 6-9707H 3500 500 integrated 100 1300 340 1230 125 45 1200 125 195 364

Residual capacity calculation: click on the line to start the calculation for this specific type