Skip to content.

Stellenangebote

Sections
You are here: Home » Products » Fork Positioners » bar type, with integral sideshift and bolt-on forks
Document Actions
Fork Positioner : Technical drawing
6-25FZ.gif
Optimum visibility: MEYER attachments are designed to work in heavy duty operations with optimum visibility for easier handling and greater safety. Less Maintenance: Because the bushes are protected against dust and dirt there is little need to grease the shaft-type guidance system. Optimum visibility: MEYER attachments are designed to work in heavy duty operations with optimum visibility for easier handling and greater safety.

The MEYER fork positioner (bar type) can hydraulically adjust the spacing of the forks within its chassis width. This robust construction has optimum visibility and little reduction in residual capacity. The unit is not suitable for clamping. The integral sideshift positions the load accurately.
  • Additional hydraulics required
    > one
    > two if sideshift required
  • The unit has an integral sideshift
  • Forks are attached to arm carriers
    and secured with 3 bolts.
  • Hydraulic flow:
    6-2504F-Z - 20 Ltr./min.
    6-2506F-Z - 30 Ltr./min.
    6-2509F-Z - 40 Ltr./min.
    6-2512F-Z - 50 Ltr./min.
  • Other capacities and opening ranges
Additional Cost for:
  • Load backrest
    Type 7-25xx
  • Quick disconnect lower hooks
    - ISO II
    - ISO III
    - ISO IV
  • Special drill holes
[ Fork Positioner ]
bar type, with integral sideshift and bolt-on forks
Technical drawing
6-25FZ.gif


r
- 		type
- 		Q
kg 		lc
mm 		ISO
cl. 		-
kg 		-
lc 		A
mm 		-
mm 		F
mm 		F
mm 		K
mm 		H
mm 		L
mm 		D
mm 		C
mm 		E
mm 		M
kg 		[R]
-
a 6-2504F-Z 2500 500 2 2500 500 730 670 200 520 120 40 1200 40 95 230 235 » calculate
b 6-2504F-Z 2500 500 2 2500 500 880 770 200 670 120 40 1200 40 95 218 250 » calculate
c 6-2504F-Z 2500 500 2 2500 500 900 770 200 690 120 40 1200 40 95 216 252 » calculate
d 6-2504F-Z 2500 500 2 2500 500 950 770 200 740 120 40 1200 40 95 213 258 » calculate
e 6-2504F-Z 2500 500 2 2500 500 1000 770 200 790 120 40 1200 40 95 210 260 » calculate
f 6-2504F-Z 2500 500 2 2500 500 1050 770 200 840 120 40 1200 40 95 207 265 » calculate
g 6-2504F-Z 2500 500 2 2500 500 1100 960 200 890 120 40 1200 40 95 204 270 » calculate
h 6-2504F-Z 2500 500 2 2500 500 1150 960 200 940 120 40 1200 40 95 201 275 » calculate
i 6-2504F-Z 2500 500 2 2500 500 1200 960 200 990 120 40 1200 40 95 198 280 » calculate
j 6-2504F-Z 2500 500 2 2500 500 1300 1150 200 1090 120 40 1200 40 95 192 291 » calculate
k 6-2504F-Z 2500 500 2 2500 500 1400 1150 200 1190 120 40 1200 40 95 184 306 » calculate
a 6-2506F-Z 3500 500 3 3500 500 1100 965 200 890 120 45 1200 45 95 208 304 » calculate
b 6-2506F-Z 3500 500 3 3500 500 1150 965 200 940 120 45 1200 45 95 203 311 » calculate
c 6-2506F-Z 3500 500 3 3500 500 1200 965 200 990 120 45 1200 45 95 200 318 » calculate
d 6-2506F-Z 3500 500 3 3500 500 1250 965 200 1040 120 45 1200 45 95 196 325 » calculate
e 6-2506F-Z 3500 500 3 3500 500 1300 1150 200 1090 120 45 1200 45 95 191 334 » calculate
f 6-2506F-Z 3500 500 3 3500 500 1350 1150 200 1140 120 45 1200 45 95 187 343 » calculate
g 6-2506F-Z 3500 500 3 3500 500 1400 1150 200 1190 120 45 1200 45 95 183 352 » calculate
h 6-2506F-Z 3500 500 3 3500 500 1500 1340 200 1290 120 45 1200 45 95 176 369 » calculate
i 6-2506F-Z 3500 500 3 3500 500 1600 1340 200 1390 120 45 1200 45 95 170 386 » calculate
a 6-2509F-Z 4500 600 3 4500 600 1100 965 220 870 140 50 1200 50 105 231 381 » calculate
b 6-2509F-Z 4500 600 3 4500 600 1200 965 220 970 140 50 1200 50 105 225 393 » calculate
c 6-2509F-Z 4500 600 3 4500 600 1300 1150 220 1070 140 50 1200 50 105 220 405 » calculate
d 6-2509F-Z 4500 600 3 4500 600 1350 1150 220 1120 140 50 1200 50 105 217 411 » calculate
e 6-2509F-Z 4500 600 3 4500 600 1400 1150 220 1170 140 50 1200 50 105 215 417 » calculate
f 6-2509F-Z 4500 600 3 4500 600 1500 1340 220 1270 140 50 1200 50 105 210 429 » calculate
g 6-2509F-Z 4500 600 3 4500 600 1800 1530 220 1570 140 50 1200 50 105 192 483 » calculate
a 6-2510F-Z 5000 600 3 5000 500 1320 1150 220 1070 130 60 1200 60 105 234 425 » calculate
b 6-2510F-Z 5000 600 3 5000 500 1370 1150 220 1120 130 60 1200 60 105 231 431 » calculate
c 6-2510F-Z 5000 600 3 5000 500 1420 1150 220 1170 130 60 1200 60 105 229 437 » calculate
d 6-2510F-Z 5000 600 3 5000 500 1520 1340 220 1270 130 60 1200 60 105 223 449 » calculate
e 6-2510F-Z 5000 600 3 5000 500 1820 1530 220 1570 130 60 1200 60 105 205 503 » calculate
a 6-2512F-Z 6000 600 4 6000 600 1300 1135 230 1050 130 60 1200 60 120 173 600 » calculate
b 6-2512F-Z 6000 600 4 6000 600 1400 1135 230 1150 130 60 1200 60 120 170 617 » calculate
c 6-2512F-Z 6000 600 4 6000 600 1500 1135 230 1250 130 60 1200 60 120 166 634 » calculate
d 6-2512F-Z 6000 600 4 6000 600 1700 1370 230 1450 130 60 1200 60 120 159 668 » calculate
e 6-2512F-Z 6000 600 4 6000 600 1800 1610 230 1550 130 60 1200 60 120 156 685 » calculate
f 6-2512F-Z 6000 600 4 6000 600 2000 1610 230 1750 130 60 1200 60 120 145 747 » calculate
g 6-2512F-Z 6000 600 4 6000 600 2200 1850 230 1950 130 60 1200 60 120 137 809 » calculate
a 6-2516F-Z 8000 600 4 8000 600 1600 1200 280 1270 150 70 1200 60 130 194 825 » calculate
b 6-2516F-Z 8000 600 4 8000 600 1800 1400 280 1470 150 70 1200 60 130 188 858 » calculate
c 6-2516F-Z 8000 600 4 8000 600 2000 1600 280 1670 150 70 1200 60 130 181 891 » calculate
d 6-2516F-Z 8000 600 4 8000 600 2200 1800 280 1870 150 70 1200 60 130 175 927 » calculate
e 6-2516F-Z 8000 600 4 8000 600 2400 2000 280 2070 150 70 1200 60 130 169 959 » calculate
a 6-2518F-Z 10000 600 4 10000 600 1600 1200 280 1270 200 70 1200 70 130 219 933 » calculate
b 6-2518F-Z 10000 600 4 10000 600 1800 1400 280 1470 200 70 1200 70 130 212 966 » calculate
c 6-2518F-Z 10000 600 4 10000 600 2000 1600 280 1670 200 70 1200 70 130 206 999 » calculate
d 6-2518F-Z 10000 600 4 10000 600 2200 1800 280 1870 200 70 1200 70 130 199 1035 » calculate
e 6-2518F-Z 10000 600 4 10000 600 2400 2000 280 2070 200 70 1200 70 130 193 1067 » calculate
a 6-2525F-Z 8000 1100 4 8000 1100 2100 1600 280 1780 200 80 1200 80 145 202 1252 » calculate
b 6-2525F-Z 8000 1100 4 8000 1100 2200 1600 280 1880 200 80 1200 80 145 199 1276 » calculate
c 6-2525F-Z 8000 1100 4 8000 1100 2300 1800 280 1980 200 80 1200 80 145 196 1301 » calculate
d 6-2525F-Z 8000 1100 4 8000 1100 2400 1800 280 2080 200 80 1200 80 145 193 1326 » calculate

Residual capacity calculation: click on the line to start the calculation for this specific type