Document Actions
Rotating Fork Positioner : Technical drawing
5-25_neu.jpg
Easy Maintenance: Our highly-developed construction is made of high quality parts and has minimum wear parts. In addition to long life, this construction allows for easy inspection and quick adjustment. Optimum visibility: MEYER attachments are designed to work in heavy duty operations with optimum visibility for easier handling and greater safety. Rotate Gears: Compact direct drive with hydraulic clutch brake and multiple overlap of the worm and ring gear ensure sensitive and safe manoeuvrability of loads. Minimal parts allow for fast and easy maintenance. Rotator Housing: Corrosion resistant cast housing hermetically seals the worm drive gears and bearing to meet operational requirements of a hostile environment so that grinding dust, aggressive chemicals, salt water etc. cannot penetrate. Especially suitable for moulding operations, cold store operations and chemical factories. Safety: Minimum lost load centre at 0mounting: therefore the mast is vertical when the forks are horizontal so the standard back tilt of the forklift is fully effective to safely secure the load on

The rotating MEYER fork positioner enables the hydraulic adjustment of the forks within the width of the truck. In addition the 360° continuous rotation enables flexibility and discharge. A separate sideshift is also available. The unit is not suitable for clamping or squeezing.
  • Additional Hydraulics required
    >two for use of positioning and rotating functions
  • Hydraulic flow:
    5-2503F-Z- 20 Ltr./min.
    5-2504F-Z- 25 Ltr./min. 
    5-2507F-Z- 30 Ltr./min.
    5-2508F-Z- 40 Ltr./min.

  • Other capacities and opening ranges
Additional Cost for:
  • Separate, built-on sideshift
    (a further hydraulic function or solenoid valve required)
    - ISO II, +/- 100 mm
    - ISO III, +/- 100 mm
  • Solenoid valve
  • Solenoid valve control kit
    (cable drum, push button, relay)
  • Quick disconnect lower hooks
    - ISO II
    - ISO III
  • Motor and brake protection
[ Rotating Fork Positioner ]
360°continuous
Technical drawing
5-25_neu.jpg


Z
- 		-
type 		Q
kg 		LSP
mm
kg 		LSP
mm 		ISO
cl. 		A
mm
mm 		F
mm 		F
mm 		K
mm 		H
mm 		L
mm 		D
mm 		C
mm 		E
mm 		M
kg 		[R]
-
a 5-2503F-Z 1500 500 2000 500 2 1000 900 200 790 120 40 1200 40 198 219 370 » calculate
b 5-2503F-Z 1500 500 2000 500 2 1100 900 200 890 120 40 1200 40 198 216 380 » calculate
c 5-2503F-Z 1500 500 2000 500 2 1200 900 200 990 120 40 1200 40 198 213 390 » calculate
a 5-2504F-Z 2200 500 2500 500 2 1100 900 200 890 120 45 1200 45 198 220 395 » calculate
b 5-2504F-Z 2200 500 2500 500 2 1200 900 200 990 120 45 1200 45 198 217 405 » calculate
c 5-2504F-Z 2200 500 2500 500 2 1300 900 200 1090 120 45 1200 45 198 214 415 » calculate
a 5-2507F-Z 3500 500 3500 500 3 1100 950 200 890 120 50 1200 50 211 210 546 » calculate
b 5-2507F-Z 3500 500 3500 500 3 1200 950 200 990 120 50 1200 50 211 202 560 » calculate
c 5-2507F-Z 3500 500 3500 500 3 1300 950 200 1090 120 50 1200 50 211 194 574 » calculate
a 5-2508F-Z 4000 600 5000 500 3 1120 1100 220 870 140 50 1200 50 234 195 820 » calculate
b 5-2508F-Z 4000 600 5000 500 3 1220 1100 220 970 140 50 1200 50 234 190 832 » calculate
c 5-2508F-Z 4000 600 5000 500 3 1320 1100 220 1070 140 50 1200 50 234 185 844 » calculate
d 5-2508F-Z 4000 600 5000 500 3 1420 1100 220 1170 140 50 1200 50 234 180 856 » calculate

Residual capacity calculation: click on the line to start the calculation for this specific type