Skip to content.

Stellenangebote

Sections
You are here: Home » Products » Paper Roll Clamps » Tyre Clamp 360° rotating
Document Actions
Tyre Clamp : Technical drawing
Easy Maintenance: Our highly-developed construction is made of high quality parts and has minimum wear parts. In addition to long life, this construction allows for easy inspection and quick adjustment. Optimum visibility: MEYER attachments are designed to work in heavy duty operations with optimum visibility for easier handling and greater safety. Rotate Gears: Compact direct drive with hydraulic clutch brake and multiple overlap of the worm and ring gear ensure sensitive and safe manoeuvrability of loads. Minimal parts allow for fast and easy maintenance. Rotator Housing: Corrosion resistant cast housing hermetically seals the worm drive gears and bearing to meet operational requirements of a hostile environment so that grinding dust, aggressive chemicals, salt water etc. cannot penetrate. Especially suitable for moulding operations, cold store operations and chemical factories. Safety: Minimum lost load centre at 0mounting: therefore the mast is vertical when the forks are horizontal so the standard back tilt of the forklift is fully effective to safely secure the load on

The MEYER 360° rotating tyre clamp is suitable for lifting horizontal or vertical tyres in a large range of diameters. The thin profile contact pad arms prevent gamage to the tyres and allow for compact stacking and retrieving. The clamp uses the proven MEYER rotator with its direct worm/ring gear drive and clutch brake system.
  • Additional hydraulics required
    > two
  • An adjustable pressure relief valve is included
  • Short arm: Type with the letter A = adjustable at 45° only /
    B = adjustable in any position
  • Standard pad facing Metal Grit H24
    5° mast tilt is required for handling horizontal rolls
  • Truck pressure must be 150 bar. Lower pressures can reduce
    clamp capacity.
  • Hydraulic flow:
    5-3703F- 25 Ltr./min.
    5-3704N-A- 30 Ltr./min.
    5-3704F-A- 30 Ltr./min.
  • Other capacities and roll diameters
Additional Cost for:
  • Separate, built-on sideshift
    (Further additional hydraulic or solenoid required)
    - ISO II, +/- 100 mm
    - ISO III, +/- 100 mm
  • Solenoid valve
  • Solenoid valve control kit
    (cable drum, push button, relay)
  • Quick disconnect lower hooks
    - ISO II
    - ISO III
  • Setting of rotation range
  • Other pad facing
[ Tyre Clamp ]
360° rotating
Technical drawing


Z
- 		-
type 		Q
kg 		kg
- 		LSP
- 		ISO
Kl. 		fest/
verstellbar 		Ø
mm 		Ø
mm 		D
mm 		H
mm 		L
mm 		K
mm 		C
mm 		E
mm 		M
kg 		[R]
-
a 5-3719G-13A 1000 3000 500 2/3 adjustable 250 1300 1820 652 1800 250 188 350 735 » calculate
b 5-3719G-13 1000 3000 500 2/3 fixed 450 1300 1820 652 1800 250 188 352 725 » calculate
a 5-3722G-16A 2000 3500 500 2/3 adjustable 250 1600 1820 652 1800 250 200 408 900 » calculate

Residual capacity calculation: click on the line to start the calculation for this specific type