Document Actions
Paper Roll Clamp
: Technical drawing
The MEYER 360° rotating paper roll clamp is suitable for lifting horizontal or vertical paper rolls in a large range of diameters. The thin profile contact pad arms prevent damage to the rolls and allow for compact stacking and retrieving. The clamp uses the proven MEYER rotator with its direct worm/ring gear drive and clutch brake system. The 360° rotation prevents roll edge damage when placing rolls down onto surfaces that are not level.
- Additional hydraulics required E
> two - An adjustable pressure relief valve is included
- Standard pad facings metal grain
- Mast tilt is required for the handling of horizontal rolls
Generation N: 5°, Generation F: 3,5°, Generation H: 0°
(Generation H has 1.5 deg. forward tilt in the attachment) - Short arm: Type A = adjustable at 45° only / B = adjustable in
any position - Truck pressure must be 150 bar. Lower pressures can reduce
clamp capacity. - Hydraulic flow:
5-2101H, 5-2201F, 02F - 20 Ltr./min. 5-2203N/F - 25 Ltr./min. 5-2204N/F, 05N/F - 30 Ltr./min. 5-2206N/F - 40 Ltr./min. 5-2207N/F, 08N/F, 09F - 50 Ltr./min. 5-2210N/F, 12N/F - 60 Ltr./min.
- Other capacities and roll diameters
- Separate, built-on sideshift
(Further additional hydraulic or solenoid required)
- ISO II, +/- 100 mm
- ISO III, +/- 100 mm
- ISO IV, +/- 100 mm - Solenoid valve
- Solenoid valve control kit
(cable drum, push button, relay) - Quick disconnect lower hooks
- ISO II
- ISO III - Setting of rotation range 180°
- Pad facing
- Rubber 10 mm
- Rubber 20 mm
- Diamond shaped rubber 10 mm
- Polyurethane
- Metal Grit H30/24/16
- Chequer facing
- More on request - Additional wear plate for short arm
(optional extra)
[ Paper Roll Clamp
]
360° rotating
Technical drawing
Residual capacity calculation: click on the line to start the calculation for this specific type