Skip to content.

Stellenangebote

Sections
You are here: Home » Products » Pallet Handler » 2/1 Pallet Clamp, with sideshift, profile type
Document Actions
2/1 Pallet Clamp : Technical drawing
Easy Maintenance: Our highly-developed construction is made of high quality parts and has minimum wear parts. In addition to long life, this construction allows for easy inspection and quick adjustment. Optimum visibility: MEYER attachments are designed to work in heavy duty operations with optimum visibility for easier handling and greater safety. Aluminium Profile N series: The symmetrical pitch of the mounting holes in the aluminium channels allow them to be re mounted in a 180inverted position for longer life. The internal I-shaped profiling accommodate the steel slide bars to form a guidance system with a high strength to weight ratio. Extreme Operations: The unit can withstand extreme operations such as uneven ground, high dynamic loading, heavy dirt, aggressive chemicals, salt water etc., high or low temperatures and even combinations of these. Generation K: The combination of proven and high tensile aluminium channels with the new wear-resistant polyamide inserts leads to reduced maintenance cost and optimum slide characteristics.

The MEYER 2 or 1 pallet clamp with heavy duty profile guidance system can lift two pallets side by side (even with a gap between them) or closed a single pallet. Increasing the efficiency of the fork truck, the fork arms are hydraulically adjusted by a single control lever from the driver’s position. A sideshift positions the loads accurately.
  • Additional hydraulics required
    > two
  • The unit has an integrated sideshift
  • Equipped with high quality bolt-on forks
  • The forks are interchangeable
  • The fork spread on types 03K/04K/06K can be alternatively set
    to 650 mm or 700 mm*.
  • Min. truck carriage
    6-6203K - 1020 mm
    6-6204K - 1020 mm
    6-6206K - 1020 mm
    6-6207K - 1020 mm
    6-6208K - 1020 mm
    6-6209K - 1350 mm
  • Hydraulic flow:
    6-6203K - 20 Ltr./min.
    6-6204K - 20 Ltr./min.
    6-6206K - 30 Ltr./min.
    6-6207K - 30 Ltr./min.
    6-6208K - 40 Ltr./min.
    6-6209K - 40 Ltr./min.
Additional Cost for:
  • Special load backrests
  • Alternative fork length
  • Other opening range
  • Other fork spread
[ 2/1 Pallet Clamp ]
with sideshift, profile type
Technical drawing


r
- 		type
- 		Q
kg 		LSP
mm 		ISO
Kl. 		-
kg 		-
LSP 		A
mm 		-
mm 		F
mm 		F
mm 		Z
mm 		K
mm 		H
mm 		W
mm 		L
mm 		D
mm 		C
mm 		E
mm 		M
kg 		[R]
-
a 6-6203K 1600 600 2 2500 500 1200 100 560 1940 1350 80 40 560 1150 40 167 210 505 » calculate
a 6-6204K 2000 600 2 2500 500 1200 100 560 1940 1350 80 50 560 1150 50 164 235 550 » calculate
a 6-6206K 2600 600 3 3500 500 1200 100 560 1940 1350 80 50 560 1150 50 164 235 575 » calculate
a 6-6207K 3200 600 3 4500 500 1200 100 560 1940 1350 80 60 560 1150 60 170 240 650 » calculate
a 6-6208K 3800 600 3 4500 600 1200 100 560 1940 1350 80 60 560 1150 60 203 310 865 » calculate
a 6-6209K 5000 600 4 6000 600 1300 100 560 2040 1350 80 70 560 1150 70 210 240 980 » calculate

Residual capacity calculation: click on the line to start the calculation for this specific type