Skip to content.

Stellenangebote

Sections
You are here: Home » Products » Clamps » Rotating Pallet Inverter
Document Actions
Rotating Pallet Inverter : Technical drawing
Easy Maintenance: Our highly-developed construction is made of high quality parts and has minimum wear parts. In addition to long life, this construction allows for easy inspection and quick adjustment. Optimum visibility: MEYER attachments are designed to work in heavy duty operations with optimum visibility for easier handling and greater safety. Aluminium Profile N series: The symmetrical pitch of the mounting holes in the aluminium channels allow them to be re-mounted in a 180inverted position for longer life. The internal I-shaped profiling accommodate the steel slide bars to form a guidance system with a high strength to weight ratio. Generation K: The combination of proven and high tensile aluminium channels with the new wear-resistant polyamide inserts leads to reduced maintenance cost and optimum slide characteristics. Rotate Gears: Compact direct drive with hydraulic clutch brake and multiple overlap of the worm and ring gear ensure sensitive and safe manoeuvrability of loads. Minimal parts allow for fast and easy maintenance. Rotator Housing: Corrosion resistant cast housing hermetically seals the worm drive gears and bearing to meet operational requirements of a hostile environment so that grinding dust, aggressive chemicals, salt water etc. cannot penetrate. Especially suitable for moulding operations, cold store operations and chemical factories.

The Meyer 360° rotating pallet inverter is used to transfer loads from one pallet to another load carrier or when a load must be turned in a production process. Typical operational uses are in the food, paper, beverage, chemical and wood industries. Side support plates are also available for delicate loads.
  • Additional hydraulics required
    > two
  • An adjustable pressure relief valve is included
  • Minimum load height is determined by the chassis
    width not the opening range
  • Hydraulic flow:
    5-3002K - 20 Ltr./min.
    5-3003K - 25 Ltr./min.
    5-3004K - 30 Ltr./min.
    5-3005K - 30 Ltr./min.
    5-3006K - 40 Ltr./min.
    5-3007K - 40 Ltr./min.
  • Other capacities, fork lengths and opening ranges
  • Dimensions over pair of forks T=760 mm
Additional Cost for:
  • Separate, built-on sideshift
    (Further additional hydraulic or solenoid required)
    - ISO II, +/- 100 mm
    - ISO III, +/- 100 mm
    - ISO IV, +/- 100 mm
  • Solenoid valve
  • Solenoid valve control kit
    (cable drum, push button, relay)
  • Quick disconnect lower hooks
    - ISO II
    - ISO III
  • Side support plate
  • Motor and brake protection
[ Rotating Pallet Inverter ]
360°rotating
Technical drawing


r
- 		type
- 		Q
kg 		LSP
mm 		ISO
Kl. 		-
kg 		-
LSP 		A
mm 		F
mm 		F
mm 		K
mm 		H
mm 		T
mm 		L
mm 		D
mm 		C
mm 		E
mm 		M
kg 		[R]
-
a 5-3002K 1250 500 2 1600 500 880 480 1600 120 50 560 1150 40 198 295 490 » calculate
b 5-3002K 1250 500 2 1600 500 980 480 1700 120 50 560 1150 40 198 290 505 » calculate
c 5-3002K 1250 500 2 1600 500 1080 480 1800 120 50 560 1150 40 198 285 520 » calculate
d 5-3002K 1250 500 2 1600 500 1180 680 2300 120 50 560 1150 40 198 280 540 » calculate
a 5-3003K 1500 500 2 2000 500 980 460 1680 120 60 560 1150 40 198 300 560 » calculate
b 5-3003K 1500 500 2 2000 500 1080 460 1780 120 60 560 1150 40 198 290 580 » calculate
a 5-3004K 2000 500 2 2500 500 1000 460 1630 140 60 560 1150 40 221 325 610 » calculate
b 5-3004K 2000 500 2 2500 500 1100 460 1730 140 60 560 1150 40 221 320 640 » calculate
c 5-3004K 2000 500 2 2500 500 1100 560 1930 140 60 560 1150 40 221 315 650 » calculate
a 5-3005K 2500 500 2/3 3000 500 1100 460 1730 150 60 560 1150 40 231 300 710 » calculate
b 5-3005K 2500 500 2/3 3000 500 1200 460 1830 150 60 560 1150 40 231 290 740 » calculate
c 5-3005K 2500 500 2/3 3000 500 1300 460 1930 150 60 560 1150 40 231 285 770 » calculate
d 5-3005K 2500 500 2/3 3000 500 1300 580 2170 150 60 560 1150 40 231 280 800 » calculate
a 5-3006K 3000 500 3 4000 500 1200 460 1830 150 60 560 1150 40 240 300 840 » calculate
b 5-3006K 3000 500 3 4000 500 1300 560 2130 150 60 560 1150 40 240 290 870 » calculate
a 5-3007K 3500 500 3/4 4000 500 1300 560 2130 150 60 560 1150 50 271 300 1080 » calculate
b 5-3007K 3500 500 3/4 4000 500 1400 660 2430 150 60 560 1150 50 271 290 1120 » calculate

Residual capacity calculation: click on the line to start the calculation for this specific type