Skip to content.

Stellenangebote

Sections
You are here: Home » Products » Clamps » 2-Way Fork Clamp
Document Actions
2-Way Fork Clamp : Technical drawing
Easy Maintenance: Our highly-developed construction is made of high quality parts and has minimum wear parts. In addition to long life, this construction allows for easy inspection and quick adjustment. Optimum visibility: MEYER attachments are designed to work in heavy duty operations with optimum visibility for easier handling and greater safety. Aluminium Profile N series: The symmetrical pitch of the mounting holes in the aluminium channels allow them to be re-mounted in a 180inverted position for longer life. The internal I-shaped profiling accommodate the steel slide bars to form a guidance system with a high strength to weight ratio. Generation K: The combination of proven and high tensile aluminium channels with the new wear-resistant polyamide inserts leads to reduced maintenance cost and optimum slide characteristics.

The MEYER 2-way fork clamp offers many handling options through fast manual adjustment of the forks from 0° to lift pallets, 45° to lift drums and round objects, 90° to clamp palletless loads such as drums, cases bales etc. Slip on arms can further increase the handling options.
  • Additional hydraulics required
    > one
    > two, if sideshift required
  • Clamping with vertical forks only
  • The unit has an integral sideshift with pressure relief valve
  • Equipped with valve guard protection
  • Hydraulic flow:
    3-0502K - 20 Ltr./min.
    3-0503K - 25 Ltr./min.
    3-0504K - 30Ltr./min.
    3-0506K - 40 Ltr./min.
  • Other fork lengths and opening ranges
  • Various slip-on arms available
Additional Cost for:
  • Separate, built-on sideshift
    - ISO II, +/- 100 mm
    - ISO III, +/- 100 mm
  • Integral design
    (roller axles, chain anchors and carriage drawings must be supplied)
    - ISO II
    - ISO III
  • Load backrest
    Type 7-05xx
  • Quick disconnect lower hooks
    - ISO II
    - ISO III
[ 2-Way Fork Clamp ]
with integral sideshift
Technical drawing


Z
- 		-
type 		Q2
kg 		Q1
kg 		lc
mm 		ISO
Kl. 		-
kg 		-
LSP 		A
mm 		F
mm 		F
mm 		J
mm 		J
mm 		K
mm 		H
mm 		L
mm 		Ev
mm 		C
mm 		Eh
mm 		M
kg 		[R]
-
a 3-0510G-EU 1400 1000 500 2 1200 500 930 360 1590 610 1840 100 40 1000 150 191 192 297 » calculate
b 3-0510G-EU 1400 1000 500 2 1200 500 930 360 1590 610 1840 100 40 1200 147 191 210 312 » calculate
a 3-0514G-EU 1800 1400 500 2 1600 500 930 300 1530 590 1820 130 40 1000 152 197 237 333 » calculate
b 3-0514G-EU 1800 1400 500 2 1600 500 930 300 1530 590 1820 130 40 1200 149 197 277 356 » calculate
a 3-0518G 2300 1800 500 2 2000 500 970 400 1730 720 2050 130 50 1200 137 218 277 385 » calculate
b 3-0518G-EU 2300 1800 500 2 2000 500 1100 230 1520 550 1840 130 50 1200 137 218 269 391 » calculate
a 3-0522G 2600 2200 500 2 2500 500 970 400 1730 720 2050 130 50 1200 137 221 277 404 » calculate
b 3-0522G-EU 2600 2200 500 2 2500 500 1100 230 1520 550 1840 130 50 1200 137 221 274 410 » calculate
a 3-0528G 3200 2800 500 3 3000 500 970 400 1730 720 2050 130 50 1200 145 231 230 445 » calculate
b 3-0528G-EU 3200 2800 500 3 3000 500 1100 230 1520 550 1840 130 50 1200 145 231 227 453 » calculate
a 3-0535G 3800 3500 500 3 4000 500 1250 470 1970 820 2320 150 50 1200 203 255 235 625 » calculate
b 3-0535G-EU 3800 3500 500 3 4000 500 1150 180 1430 530 1780 150 50 1200 203 255 243 592 » calculate

Residual capacity calculation: click on the line to start the calculation for this specific type