Skip to content.

Stellenangebote

Sections
You are here: Home » Products » Bale Clamps » Tobacco clamp, with integral sideshift
Document Actions
Tobacco clamp : Technical drawing
Easy Maintenance: Our highly-developed construction is made of high quality parts and has minimum wear parts. In addition to long life, this construction allows for easy inspection and quick adjustment. Optimum visibility: MEYER attachments are designed to work in heavy duty operations with optimum visibility for easier handling and greater safety. Aluminium Profile N series: The symmetrical pitch of the mounting holes in the aluminium channels allow them to be re-mounted in a 180inverted position for longer life. The internal I-shaped profiling accommodate the steel slide bars to form a guidance system with a high strength to weight ratio. Generation K: The combination of proven and high tensile aluminium channels with the new wear-resistant polyamide inserts leads to reduced maintenance cost and optimum slide characteristics.

The MEYER tobacco clamp is used for the easy clamping of tobacco bales and carton goods. The thin profile arms provide easy clamping and enable tight stacking. The integral sideshift ensures safe lateral movement and accurate positioning of the load at a minimum lost load centre.
  • Additional hydraulics required
    > one
    > two if sideshift required
  • The unit has an integral sideshift with pressure relief valve
  • An adjustable pressure relief valve is included
  • Including load bumper plates to protect the load
  • Wear-plates under the arms included
  • Reinforced wire gripping rods on inner arm facing
  • Hydraulic flow:
    3-2302K - 20 Ltr./min.
    3-2303K - 25 Ltr./min.
    3-2304K - 30 Ltr./min.
  • Other capacities, arm dimensions and opening ranges
Additional Cost for:
  • Separate, built-on sideshift
    - ISO II, +/- 100 mm
  • Integral design
    (roller axles, chain anchors and carriage drawings must be supplied)
    - ISO II
  • Load backrest
    Type 7-05xx
  • Quick disconnect lower hooks
    - ISO II
[ Tobacco clamp ]
with integral sideshift
Technical drawing


r
- 		type
- 		Q
kg 		LSP
mm 		ISO
Kl. 		-
kg 		-
LSP 		A
mm 		F
mm 		F
mm 		K
mm 		H
mm 		L
mm 		D
mm 		C
mm 		E
mm 		M
kg 		[R]
-
a 3-2302K 1000 500 2 1500 500 880 420 1440 25 660 760 40 112 200 300 » calculate
b 3-2302K 1000 500 2 1500 500 880 520 1640 25 660 760 40 112 190 320 » calculate
a 3-2303K 1600 500 2 1800 500 880 510 1630 30 660 760 40 112 180 340 » calculate
b 3-2303K 1600 500 2 1800 500 980 510 1730 30 660 760 40 112 170 360 » calculate
a 3-2304K 2000 500 2 2500 500 1000 500 1670 35 660 760 40 138 160 460 » calculate
b 3-2304K 2000 500 2 2500 500 1000 500 1670 35 660 915 40 138 200 490 » calculate

Residual capacity calculation: click on the line to start the calculation for this specific type