Skip to content.

Stellenangebote

Sections
You are here: Home » Products » Bale Clamps » Bale Clamp, with integral sideshift
Document Actions
Bale Clamp : Technical drawing
Easy Maintenance: Our highly-developed construction is made of high quality parts and has minimum wear parts. In addition to long life, this construction allows for easy inspection and quick adjustment. Optimum visibility: MEYER attachments are designed to work in heavy duty operations with optimum visibility for easier handling and greater safety. Aluminium Profile N series: The symmetrical pitch of the mounting holes in the aluminium channels allow them to be re-mounted in a 180inverted position for longer life. The internal I-shaped profiling accommodate the steel slide bars to form a guidance system with a high strength to weight ratio. Generation K: The combination of proven and high tensile aluminium channels with the new wear-resistant polyamide inserts leads to reduced maintenance cost and optimum slide characteristics.

The MEYER bale clamp lifts loosely bound bales of paper, textiles, cork, cotton, etc. The bales are gripped between the ribbed inner faces of the load arms for safe transportation.
  • Additional hydraulics required
    > one
    > two if sideshift required
  • The unit has an integral sideshift with pressure relief valve
  • Hexagon gripping rods on inner arms
  • An adjustable pressure relief valve is included
  • Wear plates under the arms included
  • Hydraulic flow:
    3-1503K - 25 Ltr./min.
    3-1504K - 30 Ltr./min.
    3-1506K - 40 Ltr./min.
    3-1507K - 40 Ltr./min.
    3-1508K - 40 Ltr./min.
  • Other arm dimensions and opening ranges
  • Various facings of inner arms
Additional Cost for:
  • Separate, built-on sideshift
    - ISO II, +/- 100 mm
    - ISO III, +/- 100 mm
  • Integral design
    (roller axles, chain anchors and carriage drawings must be supplied)
    - ISO II
    - ISO III
  • Load backrest
    Typ 7-05xx
  • Quick disconnect lower hooks
    - ISO II
    - ISO III
  • Chassis bottom sweeper plate
    Type 3-1503K
    Type 3-1504K/06K/07K
    Type 3-1508K
  • Galvanised arm design
  • Additional valve protection
[ Bale Clamp ]
with integral sideshift
Technical drawing


Z
- 		-
type 		Q
kg 		LSP
mm 		ISO
Kl. 		-
kg 		-
lc 		A
mm 		F
mm 		F
mm 		K
mm 		H
mm 		L
mm 		Ev
mm 		C
mm 		Eh
mm 		M
kg 		[R]
-

Residual capacity calculation: click on the line to start the calculation for this specific type